dmesg - 2GB larc
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.9.4-2013061402 (root@logon-achim) (gcc version 4.7.2 (Debian 4.7.2-5) ) #4 SMP Fri Jun 14 16:17:09 CEST 2013
Command line: root=/dev/xvda1 ro pci=nomsi
ACPI in unprivileged domain disabled
e820: BIOS-provided physical RAM map:
Xen: [mem 0x0000000000000000-0x000000000009ffff] usable
Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
Xen: [mem 0x0000000000100000-0x00000000f9ffffff] usable
NX (Execute Disable) protection: active
DMI not present or invalid.
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0xfa000 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff88000009a000] 9a000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0xf9e00000-0xf9ffffff]
[mem 0xf9e00000-0xf9ffffff] page 4k
BRK [0x01862000, 0x01862fff] PGTABLE
BRK [0x01863000, 0x01863fff] PGTABLE
init_memory_mapping: [mem 0xf8000000-0xf9dfffff]
[mem 0xf8000000-0xf9dfffff] page 4k
BRK [0x01864000, 0x01864fff] PGTABLE
BRK [0x01865000, 0x01865fff] PGTABLE
BRK [0x01866000, 0x01866fff] PGTABLE
init_memory_mapping: [mem 0x80000000-0xf7ffffff]
[mem 0x80000000-0xf7ffffff] page 4k
init_memory_mapping: [mem 0x00100000-0x7fffffff]
[mem 0x00100000-0x7fffffff] page 4k
RAMDISK: [mem 0x01c71000-0x0bac0fff]
NUMA turned off
Faking a node at [mem 0x0000000000000000-0x00000000f9ffffff]
Initmem setup node 0 [mem 0x00000000-0xf9ffffff]
NODE_DATA [mem 0xf9890000-0xf9893fff]
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009ffff]
node 0: [mem 0x00100000-0xf9ffffff]
On node 0 totalpages: 1023903
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 13944 pages used for memmap
DMA32 zone: 1019904 pages, LIFO batch:31
SFI: Simple Firmware Interface v0.81
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
No local APIC present
APIC: disable apic facility
APIC: switched to apic NOOP
nr_irqs_gsi: 16
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
e820: [mem 0xfa000000-0xffffffff] available for PCI devices
Booting paravirtualized kernel on Xen
Xen version: 4.1.3 (preserve-AD)
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff8800f9600000 s84672 r8192 d21824 u131072
pcpu-alloc: s84672 r8192 d21824 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1009882
Policy zone: DMA32
Kernel command line: root=/dev/xvda1 ro pci=nomsi
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3849728k/4096000k available (3568k kernel code, 388k absent, 245884k reserved, 3173k data, 880k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=12.
NR_IRQS:33024 nr_irqs:368 16
Console: colour dummy device 80x25
console [tty0] enabled
console [hvc0] enabled
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
tsc: Detected 2800.098 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.19 BogoMIPS (lpj=11200392)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00dff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Performance Events:
perf: AMD core performance counters detected
perf: AMD northbridge performance counters detected
no APIC, boot with the "lapic" boot parameter to force-enable it.
no hardware sampling interrupt available.
Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR c0010200 is 530076)
AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 10
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 00000000000003ff
NMI watchdog: disabled (cpu0): not supported (no LAPIC?)
installing Xen timer for CPU 1
SMP alternatives: switching to SMP code
installing Xen timer for CPU 2
installing Xen timer for CPU 3
installing Xen timer for CPU 4
installing Xen timer for CPU 5
installing Xen timer for CPU 6
installing Xen timer for CPU 7
installing Xen timer for CPU 8
installing Xen timer for CPU 9
installing Xen timer for CPU 10
installing Xen timer for CPU 11
Brought up 12 CPUs
devtmpfs: initialized
Grant tables using version 2 layout.
Grant table initialized
NET: Registered protocol family 16
PCI: setting up Xen PCI frontend stub
PCI: pci_cache_line_size set to 64 bytes
bio: create slab at 0
ACPI: Interpreter disabled.
xen/balloon: Initialising balloon driver.
xen-balloon: Initialising balloon driver.
vgaarb: loaded
PCI: System does not support PCI
PCI: System does not support PCI
Switching to clocksource xen
pnp: PnP ACPI: disabled
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 162112k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink socket (disabled)
type=2000 audit(1371238447.114:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7835
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of rtc_cmos failed with error -38
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
XENBUS: Device with no driver: device/vbd/51776
XENBUS: Device with no driver: device/vbd/51712
XENBUS: Device with no driver: device/vbd/51760
XENBUS: Device with no driver: device/vbd/51792
XENBUS: Device with no driver: device/vbd/51728
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/pci/0
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 880k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 520k freed
Freeing unused kernel memory: 580k freed
udevd[118]: starting version 175
microcode: CPU0: patch_level=0x0600081c
microcode: CPU1: patch_level=0x0600081c
microcode: CPU2: patch_level=0x0600081c
microcode: CPU3: patch_level=0x0600081c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Initialising Xen virtual ethernet driver.
blkfront: xvde: barrier: enabled
xvde: unknown partition table
blkfront: xvda: barrier: enabled
xvda: xvda1 xvda2 xvda3
Setting capacity to 50331648
xvda: detected capacity change from 0 to 25769803776
blkfront: xvdd: barrier: enabled
xvdd: xvdd1 xvdd2
Setting capacity to 41943040
xvdd: detected capacity change from 0 to 21474836480
blkfront: xvdf: barrier: enabled
xvdf: unknown partition table
Setting capacity to 4215275520
xvdf: detected capacity change from 0 to 2158221066240
blkfront: xvdb: barrier: enabled
xvdb: unknown partition table
Setting capacity to 231560
xvdb: detected capacity change from 0 to 118558720
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
udevd[325]: starting version 175
pcifront pci-0: Installing PCI frontend
Warning: only able to allocate 4 MB for software IO TLB
software IO TLB [mem 0xf3800000-0xf3c00000] (4MB) mapped at [ffff8800f3800000-ffff8800f3bfffff]
pcifront pci-0: Creating PCI Frontend Bus 0000:00
pcifront pci-0: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:4391] type 00 class 0x010601
pci 0000:00:00.0: reg 10: [io 0xc000-0xc007]
pci 0000:00:00.0: reg 14: [io 0xb000-0xb003]
pci 0000:00:00.0: reg 18: [io 0xa000-0xa007]
pci 0000:00:00.0: reg 1c: [io 0x9000-0x9003]
pci 0000:00:00.0: reg 20: [io 0x8000-0x800f]
pci 0000:00:00.0: reg 24: [mem 0xfebfbc00-0xfebfbfff]
pcifront pci-0: claiming resource 0000:00:00.0/0
pcifront pci-0: claiming resource 0000:00:00.0/1
pcifront pci-0: claiming resource 0000:00:00.0/2
pcifront pci-0: claiming resource 0000:00:00.0/3
pcifront pci-0: claiming resource 0000:00:00.0/4
pcifront pci-0: claiming resource 0000:00:00.0/5
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
SPL: Loaded module v0.6.1-rc14
znvpair: module license 'CDDL' taints kernel.
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:00.0: version 3.0
ahci 0000:00:00.0: enabling device (0000 -> 0003)
ahci 0000:00:00.0: Xen PCI mapped GSI22 to IRQ48
ahci 0000:00:00.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:00.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 48
ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 48
ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 48
ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 48
ata5: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbf00 irq 48
ata6: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbf80 irq 48
SPL: using hostid 0x007f0100
ZFS: Loaded module v0.6.1-rc14, ZFS pool version 5000, ZFS filesystem version 5
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-8: HGST HDS724040ALE640, MJAOA580, max UDMA/133
ata4.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100
ata4.00: configured for UDMA/133
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA HGST HDS724040AL MJAO PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 3:0:0:0: [sda] 4096-byte physical blocks
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
sda: sda1 sda9
sd 3:0:0:0: [sda] Attached SCSI disk
EXT4-fs (xvda1): re-mounted. Opts: (null)
EXT4-fs (xvda1): re-mounted. Opts: user_xattr,acl,barrier=1
Adding 262140k swap on /var/swap/swap0. Priority:-1 extents:6 across:565244k SS
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff816786c0)
gsettings[3136]: segfault at 10 ip 00007ff7aee09193 sp 00007fffce39cca8 error 6 in libgio-2.0.so.0.3200.4[7ff7aed60000+14c000]
gsettings[3138]: segfault at 10 ip 00007f7f18b71193 sp 00007fff97529e88 error 6 in libgio-2.0.so.0.3200.4[7f7f18ac8000+14c000]
gsettings[4742]: segfault at 10 ip 00007f31a7019193 sp 00007fff9ef5a608 error 6 in libgio-2.0.so.0.3200.4[7f31a6f70000+14c000]
gsettings[4744]: segfault at 10 ip 00007f431f651193 sp 00007fffef003678 error 6 in libgio-2.0.so.0.3200.4[7f431f5a8000+14c000]
gsettings[4851]: segfault at 10 ip 00007f0792169193 sp 00007fffe97d60c8 error 6 in libgio-2.0.so.0.3200.4[7f07920c0000+14c000]
gsettings[4853]: segfault at 10 ip 00007f6c23529193 sp 00007fff91bc1cb8 error 6 in libgio-2.0.so.0.3200.4[7f6c23480000+14c000]